Appeal: The proposer appealed against the decision of the WG Chairs on October 5, 2020
https://www.ripe.net/ripe/mail/archives/policy-announce/2020-October/000569.html Link: /ripe/mail/archives/policy-announce/2020-October/000569.html
Outcome of the Appeal: October 26, 2020 - The WG Chairs Collective
(WGCC) decided to uphold the decision of the Co-Chairs of the Anti-Abuse
Working Group.
https://www.ripe.net/ripe/mail/archives/policy-announce/2020-October/000571.html Link: /ripe/mail/archives/policy-announce/2020-October/000571.html
The current policy, “Abuse Contact Management in the RIPE Database” does not sufficiently validate the actual availability of the abuse-mailbox. It provides a technical validation that the mailbox/server exists – but not whether if it accepts new messages it will accept new messages, whether it belongs to the right person/team to follow up the abuse case, or even if it is monitored.
As a result, some resource holders (LIRs and End Users) might not keep this contact information up-to-date up to date, or might use a non-responsive or fake mailbox. In practice, this contact becomes ineffective to report abuse and generally gives rise to security issues and costs for the victims.
The RIPE NCC impact analysis of 2017-02, which turned into ripe-705, already recognised that false negatives and false positives are possible, and that there is a need to avoid them.
This proposal aims to solve this problem by ensuring the existence of a proper abuse-c contact and establishing a process for its utilisation.
The "abuse-c:" will reference a role object holding abuse contact information. The positioning of the “abuse-c:” attributes will make use of the hierarchical nature of the resource data to minimize the workload on resource holders. Internet number resources need to have an “abuse-c:” attribute.
The “abuse-c:” will be mandatory for all aut-nums.
Due the hierarchical nature of IP address objects, at least every direct allocated inetnum and inet6num needs to have an “abuse-c:”. Inherited objects might have their own “abuse-c:” attribute or they will be covered by the higher level objects.
The role objects used for abuse contact information will be required to contain a single “abuse-mailbox:” attribute which is intended for receiving automatic and manual reports about abusive behavior originating in the resource holders' networks.
The “abuse-mailbox:” attribute must be available in an unrestricted way via whois, APIs and future techniques.
[…]
The RIPE NCC will validate the “abuse-mailbox:” attribute at least annually. Where the attribute is deemed incorrect, it will follow up in compliance with relevant RIPE Policies and RIPE NCC procedures.
As per current practice, other "e-mail:" attributes can be included for any other purposes.
The "abuse-c:" will reference a role object holding abuse contact information. The positioning of the “abuse-c:” attributes will make use of the hierarchical nature of the resource data to minimise the workload on resource holders. Internet number resources need to have an “abuse-c:” attribute.
The “abuse-c:” will be mandatory for all aut-nums.
Due the hierarchical nature of IP address objects, at least every direct allocated inetnum and inet6num needs to have an “abuse-c:”. Inherited objects might have their own “abuse-c:” attribute or they will be covered by the higher-level objects.
The role objects used for abuse contact information will be required to contain a single “abuse-mailbox:” attribute, which must receive messages, either for automatic (e.g. X-ARF/RFC5965/RFC6650) or manual reports about abusive behaviour originating in the resource holders' networks and must not force the sender to use a form.
The “abuse-mailbox:” attribute must be available in an unrestricted way via whois, APIs and future techniques.
The RIPE NCC will validate if the “abuse-mailbox:” attribute is present and can receive messages[…]
This validation process will not check how the abuse cases are processed. The community should escalate/report back to the RIPE NCC, so anonymised statistics can be collected and periodically published.
As per current practice, other "e-mail:" attributes can be included for any other purposes.
*The RIPE NCC may change the validation period depending on the level of accuracy of the contacts. For example, switching from a six-month to one-year period once contact accuracy has improved.
It should be clear that the policy intent is not to look into how the abuse mailbox is monitored or how abuse cases are handled.
However, the community should report any situation toEmails sent to "abuse-mailbox":
The procedure, which will be developed by the RIPE NCC, must meet the following objectives:
The RIPE NCC will validate compliance with the items above, both when the "abuse-c:" and/or "abuse-mailbox:" attributes are created or updated, as well as periodically, not less than once every six months, and additionally whenever RIPE NCC sees fit.
Lack of compliance will lead to a more exhaustive follow-up, in accordance with the relevant RIPE NCC policies, procedures or contractual requirements.
Fraudulent behaviour (for example, an "abuse-mailbox" that only replies to the RIPE NCC's emails or to messages with a specific subject or content), or failure to comply with the remaining aspects of this policy (incorrect or lack of responses to abuse cases) can be reported to the RIPE NCC for a re-validation as per section 4.0.
Similarly, the frequency of the periodic validation can be modified if the RIPE NCC deems this appropriate and informs the community of its reasons for doing so.
For example, a single validation might be done in the first year to facilitate adherence to the policy. The number of annual validations could increase over time, perhaps becoming quarterly, with the aim of improving the quality of the contacts.
The Internet community is based on collaboration. However, in many cases this is not enough, enough and we need to be able to contact resource holders those resource-holders (LIRs or End Users) who may be experiencing a problem in their networks and are unaware of the situation.
This proposal solves this problem by means of a simple, periodical periodic verification, and establishes basic rules for performing such verification. It thus avoids unnecessary costs to third parties who need to contact the persons responsible for solving abuse from a specific network.
The proposal guarantees that the cost of processing the abuse report falls on the resource holder responsible (or its customers, from whom they receive financial compensation for the service), instead of falling on the victim, as would be the case if they had to resort to a legal claim. This avoids costs in terms of investigations (and lawyers, solicitors, etc.) etc. in the worst-case) and saves time for both parties.
Having an equivalent policy in different regions has the advantage of improving the overall response to abuse cases, reduces the cost for handling them, and facilitates the work of all people involved in the operation of the Internet.
RIPE NCC members have to verify and update (if required) their abuse-c objects periodically.
A similar proposal has been accepted in APNIC (already implemented) and LACNIC. It APNIC, abandoned in ARIN and is under discussion in AFRINIC. ARIN has a similar policy. the LACNIC and AFRINIC regions.
In the context of “Abuse Contact Management in the RIPE Database Link: http://www.ripe.net/publications/docs/ripe-705 ” and this impact analysis, the term ““abuse-mailbox:” attribute” refers to an email address that is entered in role objects in the RIPE Database. These role objects are referenced as “abuse-c:” attributes directly or indirectly to Internet Number resource objects (such as inetnum, inet6num, aut-num).
It is the RIPE NCC’s understanding that this policy change aims to change the abuse-mailbox validation process not to just check if the attribute is configured correctly but to ensure that the mailbox can receive messages.
This proposal also increases the frequency of the validations to every six months. Whilst increasing the current frequency of the validations it also provides the RIPE NCC a possibility to change this frequency in the future again, should the accuracy of the contacts improve. It does not provide an indicator of the levels of accuracy required for a change in frequency, leaving it open for the future interpretation of the RIPE NCC.
It is the RIPE NCC’s understanding that this policy change considers ““abuse-mailbox:” attributes” which force the sender to use a form in violation of this policy. However, during the validation process the RIPE NCC will only check if “abuse-mailbox:” attribute can receive messages. If the RIPE NCC receives a report with the report form Link: /support/contact/contact-us/ that the “abuse-mailbox:” forces the sender to use the form, it will have to follow up in compliance with relevant RIPE Policies and RIPE NCC procedures..
Not in scope are “abuse-mailbox:” attributes that are solely referenced in Internet number resources with the status LEGACY. The RIPE Policy “RIPE NCC Services to Legacy Internet Resource Holders Link: http://www.ripe.net/publications/docs/ncc-services-to-legacy-holders#1-2-scope ” requires other RIPE policies to mention legacy resources explicitly in their scope if they are to apply to legacy resources. This is not the case with the proposed policy change.
Also not in scope for this validation are scenarios where the “abuse-mailbox:” can receive messages but reports are not followed up in a way that the reporter would like. The proposal states that the community should report back such cases to the RIPE NCC, so that anonymised statistics can be collected and periodically published. These reports can be submitted with the report form Link: /support/contact/contact-us/ however the RIPE NCC will make clear on its response that it has no mandate to interfere with the internal abuse handling procedures of resource holders and it will only archive the report.
The RIPE NCC has already a process to proactively validate “abuse-mailbox:” attributes on a yearly basis, based on the accepted policy proposal 2017-02, “Regular abuse-c Validation”.
The current validation process starts with a verification tool which checks that there are no formatting errors in the email address, verifies DNS entries, looks for bogus or honeypot emails, and uses ping to check that the mailbox exists and can accept mail. This tool does not send any emails and won’t require any action on the part of the abuse contact. 92.5% of the abuse mailbox addresses passed this automated validated check.
After running the tool, email addresses that failed the test are marked as invalid, we send a validation link only to these addresses and tickets are created in our system. There were about 6000 tickets created during the implementation of the proposal 2017-02 in 2019.
A separate ticket is created for each LIR organisation abuse mailbox (~3,900 tickets in 2019).
LIR resource abuse mailboxes are grouped per corresponding LIR. The LIR needs to make sure that the abuse mailbox is validated (~600 tickets in 2019).
End User abuse mailboxes are grouped per sponsoring LIR. The sponsoring LIR needs to make sure that the abuse mailbox is validated (~1,500 tickets in 2019).
If the validation link on the ticket is clicked or the abuse-mailbox attribute is updated and the verification tool recognises it as valid within three weeks, the ticket is closed without any manual input needed from the RIPE NCC.
In about 30% of the cases, manual intervention is required from the RIPE NCC to follow up with the LIRs.
A more detailed report on the current validation method is available on this RIPE Labs article Link: https://labs.ripe.net/Members/angela_dallara/how-we-will-be-following-up-with-invalid-abuse-contacts .
If this policy change is accepted, the RIPE NCC can no longer use the verification tool as part of the validation process as this process does not send emails thus it cannot ensure that emails are received.
The rest of the validation process will remain as it currently stands. The only difference will be that the RIPE NCC will send validation links to each abuse-mailbox in the RIPE database. Previously, it was only sent to addresses deemed invalid.
The RIPE NCC expects that each validation round will need the creation of more than 32,000 tickets according to the categories below:
If this policy change is accepted there will be an increased workload for RIPE NCC members who are sponsoring End Users or have an abuse-c contact listed in their resources. We will rely on these LIRs to validate more than 70,000 abuse mailboxes. The RIPE NCC will send the validation links to all abuse mailboxes. However, it will open tickets only with the corresponding members. These members will need to follow up with their End Users/customers to make sure that they validate the abuse mailbox.
If this proposed policy change reaches consensus, an improvement of the registry data is expected as more “abuse-mailbox:” attributes will be current and correct.
The proposal does not have an impact on fragmentation and the routing system.
The RIPE Database contains around 93,000 distinct abuse-mailbox attributes. The RIPE NCC expects that each validation round will need the creation of more than 32,000 tickets or 64,000 tickets per given year (in 2019 we opened around 6,000 tickets).
While the process will be automated as much as possible, a considerable number of these tickets (around 30% according to 2019’s figures) will need to be checked manually (~19,200 tickets per year).
The estimated workload would exceed the current capacity of Registration Services. A significant increase in FTEs (employee on a full-time basis) would be required to handle this regular workload (10 times the current level). In comparison, three additional temporary FTEs were needed in 2019 to handle the manual workload generated by the initial validation of the current policy.
This amount of workload will continue until the RIPE NCC decides that the level of accuracy of the abuse mailbox attribute in the RIPE database has improved and the frequency of validation sessions can decrease. At this point, the RIPE NCC cannot reliably estimate when this may happen.
A slight increase of workload is expected from reports of abuse mailboxes forcing members to use a form.
The ARC Link: /manage-ips-and-asns/resource-management/assisted-registry-check/ process can play a supporting role, especially if there are indications that the incorrect “abuse-mailbox:” attributes are part of a bigger issue of incorrect contact information for an LIR. In such situations, an ARC can be scheduled immediately. However, full coverage via the ARC process is not possible due to the differing scope and frequency of the processes. This policy change would require the validation every six months of all abuse contact email addresses (for allocated and independent resources), while the ARC process aims to verify the registration details of LIRs only.
If the policy proposal reaches consensus, it will impose the following two criteria for a valid “abuse-mailbox:” attribute: it must receive messages and it must not force the sender to use a form. During the validation process the RIPE NCC will only check that the attribute is present and can receive messages. Cases of “abuse-mailbox:” attribute that forces the sender to use a form, if brought to the RIPE NCC’s attention, will also constitute policy violation and RIPE NCC will follow up as per relevant RIPE Policies and RIPE NCC procedures, such as “Closure of Members, De-registration of Internet Resources and Legacy Internet Resources” procedural document.
If this policy proposal reaches consensus, the RIPE NCC will make sure that all email validation checks are performed in accordance with the EU data protection legislation.
The RIPE NCC may also need to update relevant procedural documents, including the RIPE NCC procedural document “Closure of Members, Deregistration of Internet Resources and Legacy Internet Resources”.
With the information currently available, it is expected that implementation of the proposal would have a medium impact (about three months) in terms of the software development needed to facilitate the policy change. All current “abuse-mailbox:” attributes will be validated in batches.
The start of the implementation of this proposal requires a significant increase in FTE’s which would need to be included in the RIPE NCC Draft Activity Plan and Budget. This document is published in September and reviewed by the RIPE NCC membership during the autumn General Meeting. The PDP cycle of this proposal is expected to finish after the upcoming publication. This might considerably delay the start of the implementation.
The implementation will be considered completed after every “abuse-mailbox:” attribute has been validated for the first time.