This archive is retained to ensure existing URLs remain functional. It will not contain any emails sent to this mailing list after July 1, 2024. For all messages, including those sent before and after this date, please visit the new location of the archive at https://mailman.ripe.net/archives/list/ripe-atlas@ripe.net/
[atlas] Probe DHCPv6 support
- Previous message (by thread): [atlas] Probe DHCPv6 support
- Next message (by thread): [atlas] Probe DHCPv6 support
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Michel Stam
mstam at ripe.net
Thu May 18 16:41:58 CEST 2023
Hi Simon, I was actually thinking about the server side, not the client side. The client side I’ll figure out, I have some experience with OpenWRT ;) Do you have examples for that on relevant DHCPv6 implementations? Regards, Michel > On 15 May 2023, at 20:57, Simon Brandt via ripe-atlas <ripe-atlas at ripe.net> wrote: > > Hi Michel, > > sorry, i don't have an OpenWrt device that's using DHCPv6 in client mode. > But it should be easy. Make sure the 'odhcp6c' package is installed (which is the case by default). > Then change the protocol option for the interface: > > /etc/config/network > > config interface 'eth0' > option proto 'dhcpv6' > > Check out this link to see als available options for the DHCPv6 client mode: > https://openwrt.org/docs/guide-user/network/ipv6/configuration#protocol_dhcpv6 > > > As far is i can see, you can only use OpenWrt in DHCPv4 client mode OR in DHCPv6 client mode. So i guess, you have to write a small script. First try DHCPv6 and check if you can successfully get a configuration. If not, fall back to DHCPv4. Continuously toggle between DHCPv6 and DHCPv4 as long as you don't get a configuration. I would begin this loop with DHCPv6. Also keep in mind, that some DHCP server respond slow, so better wait a little bit, before switching the protocol. > > > BR, > Simon > > > > On 15.05.23 09:12, Michel Stam wrote: >> Hi, >> >> Good discussion! >> >> I’m currently looking at basing all the probes (3, 4 and 5) on OpenWRT 22.03 which is the latest stable. What I’ll do is take this along in the deliberations, and see if I can fit this into the firmware image somehow. >> >> Simon: can you provide the exact setup you use for testing? (Config snippets etc) I typically don’t have a problem on my setup here, but thats RA + DHCPv6, I don’t use DHCPv6 for the actual assignment. >> >> Regards, >> >> Michel >> >>> On 9 May 2023, at 20:27, Simon Brandt via ripe-atlas <ripe-atlas at ripe.net> <mailto:ripe-atlas at ripe.net> wrote: >>> >>> That should be "odhcp6c" >>> >>> https://openwrt.org/packages/pkgdata/odhcp6c >>> https://github.com/openwrt/odhcp6c >>> >>> >>> BR, >>> Simon >>> >>> On 09.05.23 20:22, Philip Homburg wrote: >>>> >>>> In any case, Atlas probes run a stripped down version of OpenWRT. It may help >>>> if somebody can figure out which OpenWRT packages need to be added to >>>> enable DHCPv6. >>> >>> -- >>> ripe-atlas mailing list >>> ripe-atlas at ripe.net <mailto:ripe-atlas at ripe.net> >>> https://mailman.ripe.net/ >> > > -- > ripe-atlas mailing list > ripe-atlas at ripe.net > https://mailman.ripe.net/ -------------- next part -------------- An HTML attachment was scrubbed... URL: </ripe/mail/archives/ripe-atlas/attachments/20230518/68cf2ce8/attachment.html>
- Previous message (by thread): [atlas] Probe DHCPv6 support
- Next message (by thread): [atlas] Probe DHCPv6 support
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]