[atlas] Probe not coming online anymore after firmware upgrade

https://atlas.ripe.net/about/faq/#i-have-an-ipv6-only-network-will-the-probe-work-on-it

______________________________________________________________
> Od: "Phillip Remaker" <remaker at gmail.com>
> Komu: "Philip Homburg" <philip.homburg at ripe.net>
> Datum: 22.03.2019 17:16
> Předmět: Re: [atlas] Probe not coming online anymore after firmware upgrade
>
> CC: <ripe-atlas at ripe.net>
>Can the probbes operate in IPv6 only environments, or IPv6-DNS-Only
>environments?
>
>On Fri, Mar 22, 2019 at 3:59 AM Philip Homburg <philip.homburg at ripe.net>
>wrote:
>
>> On 2019/03/21 16:41 , Annika Wickert wrote:
>> > I bought a new USB Stick for this probe as the old one was tagged as
>> > readonly etc..
>> > https://atlas.ripe.net/probes/23913/
>> >
>> > But for some reason it is not coming online at all .
>> >
>> > Any idea what could be the issue? I also see no network traffic at all
>> > originating from the probe.
>>
>> Hi Annika,
>>
>> I looked at the settings for your probe and noticed that two DNS
>> resolvers were configured with IPv6 addresses.
>>
>> The probe was able to connect to our reg. servers and download firmware.
>> So I suspected that forcing the probe to use those DNS resolvers could
>> be the cause of the problem.
>>
>> Shortly after disabling that configuration the probe managed to connect.
>> Unfortunately, for reasons unknown to me, it disconnected 12 minutes later.
>>
>> Philip
>>
>>
>
>