This archive is retained to ensure existing URLs remain functional. It will not contain any emails sent to this mailing list after July 1, 2024. For all messages, including those sent before and after this date, please visit the new location of the archive at https://mailman.ripe.net/archives/list/ripe-atlas@ripe.net/
[atlas] Probe and firewall settings?
- Previous message (by thread): [atlas] #6262 Disconnectted
- Next message (by thread): [atlas] Probe and firewall settings?
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Tim Chown
Tim.Chown at jisc.ac.uk
Mon Jan 15 13:09:14 CET 2018
Hi, At https://atlas.ripe.net/about/faq/#so-which-services-do-i-need-for-my-probe-to-work it says "The absolute minimum set is DHCP, DNS and outgoing TCP port 443 (HTTPS) in order to allow the probe to connect to the network. However, this in itself is not enough to do measurements, which is the entire focus of RIPE Atlas, so you should also allow ICMP, UDP (DNS + traceroute), TCP for traceroute and HTTP(S)." What specific ports and protocols are required for routine operation and for inbound or outbound measurements to be configured? I think the above info could be a little more detailed (having had questions asked of me). Many thanks, Tim
- Previous message (by thread): [atlas] #6262 Disconnectted
- Next message (by thread): [atlas] Probe and firewall settings?
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]