This archive is retained to ensure existing URLs remain functional. It will not contain any emails sent to this mailing list after July 1, 2024. For all messages, including those sent before and after this date, please visit the new location of the archive at https://mailman.ripe.net/archives/list/ripe-atlas@ripe.net/
[atlas] Built-in IPv6 measurements not working
- Previous message (by thread): [atlas] Built-in IPv6 measurements not working
- Next message (by thread): [atlas] Built-in IPv6 measurements not working
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Matteo Bonora
matteo at bonora.eu
Thu Nov 6 14:02:51 CET 2014
I can add that with a tcpdump on the gateway I can see incoming and outgoing v6 traffic to/from the probe. The host that I can see regularly communicate with my probe is ctr-ams13.atlas.ripe.net. Matteo On Thu, Nov 6, 2014 at 1:49 PM, Matteo Bonora <matteo at bonora.eu> wrote: > Yes, I'm sure the probe has a v6 address because it is displayed into the > "Network Information" tab and I'm 100% sure that v6 is working because all > the devices (computers, smartphones, etc.) connected to the same network > are using v6 without problems. > > My v6 network is tunneled. I know that the tunnel is up because now I'm > using v6 to surf the net and send you this email. > > I too noticed the missing system tags. Some days ago I sent a message > about this issue but unfortunately I got no answer. > > My probe's v6 address is: 2001:1418:1a5:0:6666:b3ff:feb0:ef68 > The address is also displayed when clicking on my probe on the map at this > URL https://atlas.ripe.net/results/maps/network-coverage/ > > Thanks for your help! > > Matteo > > > On Thu, Nov 6, 2014 at 1:03 PM, AlbyVA <albyva at empire.org> wrote: > >> >> >> Matteo: >> >> Are you 100% sure the probe has a v6 address or if v6 is working >> overall? >> Do you have native v6 or tunneled? Not that it matters, other than the >> tunnel could be down. >> I also don't see any v6 tags on your probe's page (ie: v6 Works or >> Resolves AAAA Correctly). >> >> Here is my probe with v6 working and I've got a v6 tunnel running: >> https://atlas.ripe.net/probes/10378/ >> >> What is your probe's v6 address? Maybe we can all see if it's pingable. >> >> On Wed, Nov 5, 2014 at 10:10 AM, Matteo Bonora <matteo at bonora.eu> wrote: >> >>> Hello, >>> >>> I have noticed that my probe (#14602) doesn't perform the IPv6 built-in >>> measurements since about 5 months. >>> >>> The probe has working IPv6 connectivity, so I can't understand where is >>> the problem. >>> >>> Anyone has an idea about what can I do to solve this? >>> >>> (below you can see some graphs of my probe's measurements. The brief >>> packet loss on IPv4 was due to a temporary network outage) >>> >>> Thanks for your help! >>> >>> Matteo >>> >>> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: </ripe/mail/archives/ripe-atlas/attachments/20141106/8176c95c/attachment.html> -------------- next part -------------- A non-text attachment was scrubbed... Name: Screen Shot 2014-11-05 at 16.01.07.png Type: image/png Size: 78152 bytes Desc: not available URL: </ripe/mail/archives/ripe-atlas/attachments/20141106/8176c95c/attachment.png>
- Previous message (by thread): [atlas] Built-in IPv6 measurements not working
- Next message (by thread): [atlas] Built-in IPv6 measurements not working
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]