[atlas] No probe shown in My Probes list (Registered. Plugged Probe v3 to network. 1st, 3rd, 4th LEDs lighted up.)

Hi Arthit,

I See you were connecting. I do not think your ISP is blocking that. You 
can actually check it yourself by executing.

telnet tealc.atlas.ripe.net 443

If it succeeds then your have non-network related problem. Most probably 
it can be because of weak power supply. Some routers cannot deliver 
enough power through USD to feed probes. Try to get external usb power 
supply.

WBR

/vty


On 7/21/13 8:13 PM, Arthit Suriyawongkul wrote:
>
> Thx.
> My experience is that, my probe will be connected for like an hour and 
> then disconnected.
> Any clue?
> Does it possible that my ISP notice the probe and cut the connection?
>
> On Jul 18, 2013 1:30 PM, "Alex Saroyan" <alexsaroyan at gmail.com 
> <mailto:alexsaroyan at gmail.com>> wrote:
>
>     Hi,
>
>     Arthit, the switch does nothing with the current firmware, so
>     doesn't matter on which position you keep the switch.
>
>     Regards.
>     /Alex
>
>
>
>     On 07/07/2013 12:34 AM, Arthit Suriyawongkul wrote:
>
>         Hi I'm Arthit from Bangkok. New here.
>
>         The switch at the probe is now at "3G/4G".
>         Should i change to WISP or AP?
>
>         thanks,
>         Art
>
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: </ripe/mail/archives/ripe-atlas/attachments/20130722/2d667234/attachment.html>