[atlas]Upgrades today

Hi,

> 2. You can now set the probe's details (geolocation and description) using
> the butting in the top right corner of the probe status page.

I'm having a problem with that.  When I enter "Rozendaal", it only knows
about this place in Zuid Holland, not the one where I live.  I then took
out my GPS and copied the coordinates from there.  However, the GPS
gives {N|S|E|W}degrees:minutes:seconds, how do I correctly enter that?
Third attemp: move the arrow on the map.  However, one can enlarge the
map but not move it around.  The arrow starts in the wrong place, where I
live is off the map.

> 3. All currently known probes will do an automatic firmware update somewhere
> in the next 12 hours. (As of now, about one third of them have already done
> this.) You don't have to do anything about this. The new firmware (version
> 3820) has:
> a) the ability to continuously ping the first two "hops" (as in a
> traceroute) on IPv4;

OK, so it is now probing the router (192.168.0.1) and firewall (10.0.0.138),
which isn't very useful (they are in the same cabinet, +/- 1 m apart).  I
agree that my setup is a bit unusual, but still, I don't think that pinging
10.0.0.138 (the default of any adsl modem) is usual.  Would it be an idea
to exclude 192.168/16 and 10/8 from the ping list?


Henk

-- 
------------------------------------------------------------------------------
Henk Uijterwaal                           Email: henk.uijterwaal(at)ripe.net
RIPE Network Coordination Centre          http://www.xs4all.nl/~henku
P.O.Box 10096          Singel 258         Phone: +31.20.5354414
1001 EB Amsterdam      1016 AB Amsterdam  Fax: +31.20.5354445
The Netherlands        The Netherlands    Mobile: +31.6.55861746
------------------------------------------------------------------------------

I confirm today what I denied yesterday.            Anonymous Politician.