[atlas]Probe flapping

Hi Robert,

It seems like a probe (ID: 303) in Asia is still having disconnection
problem. 

Connect at: 			Disconnect at:
2010-12-19 06:07:29 UTC 	(still connected)
2010-12-18 17:32:11 UTC 	2010-12-19 06:06:49 UTC
2010-12-18 17:15:28 UTC 	2010-12-18 17:30:54 UTC
2010-12-18 10:26:52 UTC 	2010-12-18 17:13:24 UTC

Or is this suppose to be normal? But every disconnect - connect session has
1-2min gap.

Best Wishes,

Aftab A. Siddiqui

-----Original Message-----
From: ripe-atlas-admin at ripe.net [mailto:ripe-atlas-admin at ripe.net] On Behalf
Of Robert Kisteleki
Sent: Friday, December 17, 2010 4:09 PM
To: ripe-atlas at ripe.net
Subject: Re: [atlas]Probe flapping

Dear All,

Here's an update to Daniel's message from yesterday.

As Daniel mentioned, on Wednesday evening our system started to migrate the
probes away from a particular controller (ronin, in DE). We have a strong
suspicion on why this happened, but it's not confirmed so I'm not going to
publicly speculate :-) In any case, since we don't yet have enough spare
capacity to handle this situation, another controller was overloaded.

We needed to fix the internal databases on these controllers, which took
some time. We were able to bring the system back to a stable state by the
afternoon.

This morning we revived some probes (25 or so) which were in a limbo -- they
were not properly connected. We forced them to re-connect, so they are fine
now. There are still some of them, like 10 or so, which are not connected
(down) so we can't really help those from here. If your probe was working
properly before Wednesday, but now is down, then please power cycle it
(using the USB power) and it will very likely come back fine.

Probes in the US (and Asia, very likely) were not affected, as they have a
local controller on the west coast, which was not involved. That's because
the system really doesn't like to send European probes to it, it's too far.

Let us know if there's anything else not working properly, so that we can
look into it.

Regards,
Robert


On 2010.12.16. 14:57, Daniel Karrenberg wrote:
> 
> Intermediate update to keep those interested informed. 
> I am writing this to keep the engineers free to work
> the problem. I do not know nitty gritty details, so 
> this is a general overview.

[...]