[mat-wg] MAT-WG proposal for WLAN measurements on RIPE Atlas

This thread seems to have gone off track and started to talk about a
platform for RIPE Atlas v4 hardware. While I encourage that discussion I'm
wondering if anyone has any comments on WLAN authentication testing and
tests being run over the /current/ Atlas platform?

Anything left out in my 5 points below?

-Brook

On 27 November 2014 at 17:52, Brook Schofield <schofield at terena.org> wrote:

> MAT-WG,
>
> thankyou for giving me the opportunity to present on "The Value of WLAN
> Measurements for the R&E Community" at the Measurement and Tools Working
> Group at RIPE69.
>
> You can find my presentation and stenography logs at:
> https://ripe69.ripe.net/presentations/91-eduroam-and-Atlas-RIPE69.pdf
> https://ripe69.ripe.net/archives/steno/40
>
>
> To progress this work within the RIPE NCC Atlas development team I'd like
> your input into the following five (5) points:
>
>
> #1: For "opt-in" WLAN measurements to be enabled on RIPE Atlas
>
> As a point of clarification (and reiterated by Daniel Karrenberg) the
> intention is that ALL v3 probes will be capable of WLAN measurements - but
> measurements will ONLY be turned on by a probe host.
>
>
> #2: WLAN measurements will support associating to an "open" or 802.1X
> protected network for the purposes of performing a measurement
>
> As an active monitoring network the Atlas probes WILL NOT scan and report
> on all/available SSIDs. It will ONLY associate with EXPLICITLY defined
> SSIDs listed in the measurement.
>
> For eduroam quality purposes the success/failure of an 802.1X associations
> is initially the most interesting part of the measurement in determining
> whether sites are correctly deploying this service. There will be results
> related to the authentication process.
>
>
> #3: Any measurements performed over the wireless interface are aligned
> with a request to associate/authenticate to a particular network.
>
> The wireless interface will be connected only for particular tests bundled
> with the association to an SSID. All other tests will be performed via the
> wired interface as is currently the case.
>
>
> #4: The schedule for implementation will be determined by the RIPE NCC R&D
> team
>
> ...but hopefully your support for this work will allow them to prioritise
> this work while not jeopardising the other commitments the team has made
> to the community.
>
>
> #5: This proposal is inline with your understanding of "WiFi measurements"
> on the Atlas roadmap
>
> I'd be particularly interested in your feedback on whether you thought
> that the WiFi Measurements listed in the
> http://roadmap.ripe.net/ripe-atlas/ would accomplish the above or
> something completely different.
>
>
> My feeling from the room was that the above was largely accepted. I'd
> appreciate those that voiced their support to also do this on the mailing
> list again. If there's any confusion I'm willing to clarify further.
>
> Thanks,
>
> -Brook
> --
> ===================================================
> Brook Schofield, Project Development Officer
> GÉANT Association, Singel 468 D, 1017 AW Amsterdam, The Netherlands
> Tel +31 20 530 4488    Fax +31 20 530 4499    Mob +31 65 155 3991
> www.géant.org <http://www.xn--gant-bpa.org>
>



-- 
===================================================
Brook Schofield, Project Development Officer
GÉANT Association, Singel 468 D, 1017 AW Amsterdam, The Netherlands
Tel +31 20 530 4488    Fax +31 20 530 4499    Mob +31 65 155 3991
www.géant.org <http://www.xn--gant-bpa.org>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: </ripe/mail/archives/mat-wg/attachments/20141210/3263a2ae/attachment.html>