[address-policy-wg] HD ratio policy proposal

Thanks Alain,
I'll as the new PDP is not in operation yet, I'll add this to my list as 
#beta v1

I propose that we enter into the Discussion phase for 4 weeks from date 
until April 4.

-hph

BIDRON Alain ROSI/DAS wrote:

>Dear Colleagues
>Referring to the minutes of the last RIPE Policy Working Group meeting and to the action list 
>as updated during that meeting, I have to make a formal proposal on use of HD ratio for IPV4.
>Here is this policy proposal.
>In order to be consistent with the PDP Draft proposal coming from Rob Blokzijl I have used the template 
>provided in the new PDP proposal.
>Best regards.
>Alain
>
>
>_________________________________________________________
>1. Policy Proposal Name: IPv4-HD-Ratio
>2. Author
> a. name: Alain Bidron
> b. e-mail: alain.bidron at francetelecom.com
> c. telephone: +33 1 44 44 27 75
> d. organisation: France Telecom
>3. Proposal Version: V0
>4. Submission Date: 02/02/2005
>5. Suggested WG for discussion and publication: Address Policy WG
>6. Proposal type: modify
>7. Policy term: permanent
>8. Summary of proposal: 
>Internet address space is managed hierarchically:
>- IANA allocates space to Regional Internet Registries (RIRs).
>- RIRs allocate space to Local Internet Registries (LIRs).
>- LIRs assign space to End Users.
>
>At each level, some address space may be reserved for future expansion and/or efficient aggregation. As more hierarchical levels are introduced, the overall efficiency of the address space usage decreases.
>
>The HD ratio (Host-Density ratio) is a way to measure address space usage [RFC 3194]. The HD ratio value can relate to a percentage of usage, which decreases as the amount of address space grows. This allows for the decreasing efficiency that occurs with more hierarchical levels.
>
>The HD ratio is currently used to measure IPv6 address space usage [ipv6-address-policy]. The IPv6 Address Allocation and Assignment Policy considers a block of IPv6 address space to be ‘used’ when its HD ratio reaches 0.80. This is a manageable figure ("values of 80% or less correspond to comfortable trade-offs between pain and efficiency" [RFC 3194]).
>
>This document proposes using the HD ratio to measure IPv4 usage. The proposed value of the HD ratio for IPv4 is 0.96.
>
>9. Policy text:
> a. Current: "An LIR may receive an additional allocation when about eighty percent (80%) of all the address space currently allocated to it is used in valid assignments or sub-allocations."
> b. New: "An LIR may receive an additional allocation when its total allocated address space usage meets the HD-Ratio value of 0.96."
>
>10. Rationale:
>
>a.	Background
>The current document, “IPv4 Address Allocation and Assignment Policies for the RIPE NCC Service Region” [ipv4-address-policy], considers a block of IPv4 addresses to be ‘used’ when 80% of the addresses within the block have been sub-allocated or assigned. This is applied to all address blocks, regardless of size.  
>
>Current policies assume a hierarchical system of address space delegation. However, they do not make any  allowance for hierarchical management within allocated address space. For LIRs in particular, a hierarchical approach is often required for assignment of address space to service elements such as customer networks, individual Points of Presence (PoPs), regionalised topologies, and even distinct ISP products. Small network infrastructures may require simple hierarchies, but large infrastructures can require several levels of address space subdivision. These levels of hierarchy are not recognised by the current policy framework and are highly restricted by the "80% rule". As a result, managing large blocks is often difficult, requiring large internal routing tables and/or frequent renumbering of internal address blocks.
>
>One of the goals of the RIR system is to avoid unnecessary depletion of IPv4 address space. However, address management policies must also be practical in terms of how much management overhead they cause. When large amounts of address space are involved, the "80% rule" can result in more work for an LIR.
>
>Basing usage on the HD ratio should lead to equal levels of management overhead across the board, rather than penalising the holders of large address blocks.
>
>b.Impact	
>To see a rough estimation of the immediate impact of this proposal, an HD Ratio value of 0.96 was applied to the average amount of address space held by an LIR in the RIPE NCC Service Region. This showed that on average, LIRs would qualify for an additional allocation block when they have assigned or sub-allocated about 59% of their allocated address space.
>
>c.Arguments supporting the proposal.
>This proposal fairly takes into account addressing hierarchies used in large and extra-large registries and introduces a useful level of flexibility for those registries
>The local Internet registries using the 80% criteria may continue to do so and will not be impacted by the new policy.
>The RIPE NCC will provide support to minimise complicated calculations or administrative burden to LIRs.
>
>d.	Arguments opposing the proposal.
>This proposal will have some limited impact on IPV4 address consumption.
>
> 
>
>
>Appendix A.  The HD ratio
>
>     The HD ratio is calculated as follows [RFC 3194]:
>
>        HD = log(U)/log(S)
>
>     Where:
>
>        S is the size of the address block concerned, and 
>        U is the number of addresses used.
>
>Note: The current IPv4 policy considers addresses to be ‘used’ once they are assigned or sub-allocated by the LIR. 
>
>Appendix B.  Selection of HD ratio value
>
>We should decide an appropriate HD ratio value on a rational basis. To do this, we make certain assumptions about the number of "hidden" hierarchical levels involved in managing address blocks of various sizes. If we assume there is 80% usage at each level, we can easily calculate the overall usage.
>
>The following table proposes a set of hierarchical levels which we can reasonably expect within different amounts of address space. If a usage of 80% is achieved at each hierarchical level, then the overall usage will be (0.80 to the power of "n"). It is then possible to calculate HD ratio values from this value.
>
>        Size range        Level     Utilisation    HD ratio
>        (prefix)            (n)          (0.80**n)     (calculated)
>     
>        /24 to /20        1             80%              .960 to .973
>        /20 to /16        1.5           72%              .961 to .970
>        /16 to /12        2             64%              .960 to .968
>        /12 to /8         2.5           57.2%            .960 to .966
>        /8 to /4          3             51.20%           .960 to .966
>     
>The levels of hierarchy listed above are based on assumptions about the likely size and structure of LIRs holding address blocks of these sizes. A reasonable HD ratio value may be 0.96 (a round figure which occurs within most of these ranges) from the table above. The following table gives the usage requirements for IPv4 address blocks from /24 to /8 for this value.
>
>        IPv4              Addresses               Addresses      Util%
>        prefix            total                   used
>        
>            24                 256                  205         80.11%
>            23                 512                  399         77.92%
>            22                1024                  776         75.79%
>            21                2048                 1510         73.71%
>            20                4096                 2937         71.70%
>            19                8192                 5713         69.74%
>            18               16384                11113         67.83%
>            17               32768                21619         65.98%
>            16               65536                42055         64.17%
>            15              131072                81811         62.42%
>            14              262144               159147         60.71%
>            13              524288               309590         59.05%
>            12             1048576               602249         57.43%
>            11             2097152              1171560         55.86%
>            10             4194304              2279048         54.34%
>             9             8388608              4433455         52.85%
>             8            16777216              8624444         51.41%
>
>Note: This table provides values for CIDR blocks, but the same calculations can be made for non-CIDR blocks.
>
>As an example, an LIR holding a total amount of address space equal to a /16 would be able to receive more address space when they had sub-allocated or assigned 64.17% of that space; while an LIR holding a /9 would be able to receive more space when they had sub-allocated or assigned 52.85% of their address space.
>
>Appendix C.  References
>[RFC 3194] "The Host-Density ratio for address assignment efficiency: An
>     update on the H ratio", A. Durand, C.Huitema, November 2001.
>[ipv6-address-policy] RIPE NCC document: "IPv6 Address Allocation and 
>     Assignment Policy" http://www.ripe.net/ripe/docs/ipv6policy.html
>[ipv4-address-policy] RIPE NCC document: "IPv4 Address Allocation and 
>     Assignment Policies for the RIPE NCC Service Region" 
>     http://www.ripe.net/ripe/docs/ipv4-policies.html
>
>  
>